1000 L stainless steel wine tank with air floating lid and Ø300 manhole

1000 L stainless steel wine tank with air floating lid with Ø300 mm manhole

Ideal for storing wine and liquid foods. Constructed of stainless steel with a fluted exterior finish. The bottom of the tank is rounded and welded for easy cleaning. It is equipped with a threaded stainless steel bushing for the application of the tap in chrome-plated brass, stainless steel or plastic material for foodstuffs and a round door Ø300 mm.

Standard equipment:

• 1" welded bushing
• 1" Stainless steel tap
• Stainless steel air float
• Air chamber
• Stainless steel pump with analogue pressure gauge
• Vent valve 1"1/4
• Ø300 mm Round manhole

Technical specifications:

• Capacity: 1000 L
• Inside diameter: 1025 mm
• Height: 1240 mm
• Material: stainless steel 18/10 (AISI 304)
• Exterior finish: fluted
• Flat, rounded and welded bottom

Thickness:

• Wall thickness: 0.8 mm
• Bottom thickness: 0.8 mm

FAQ

1 - Stainless steel pump with analog gauge
2 - Stainless steel float lid
3 - Vent valve
4 - Recovery rope

Proper use of floating air lids:

1. always fully fill the tank with wine;
2. place the stainless steel float lid on the surface of the wine;
3. unscrew the valve on the pump to allow inflation;
4. inflate the tube to about 0.7 atm;
5. check that the tube is tight against the inner surface of the tank and close the valve of the pump;
6. you should check the air pressure every 15 days.

If the tube does not maintain the pressure, please check:

1. that there are no holes;
2. the attachment between the air chamber and plastic tube;
3. that the air hose clamps are not loose;
4. that the gauge is not broken;
5. if the pump valve is working.

It can be placed on:

Stainlees steel pedestal ⌀1025 (not included and purchasable separately)