Oak Barrel 1 L ***

1 L Oak Wood Barrel ***

The selection and control of raw materials are two of the main keys to achieving success. Beyond choosing the optimal trees, it is essential to ensure consistency over time, which is synonymous with a personality that is always recognizable.

The semi-finished products are selected and cut to the same final height, ensuring uniformity. The wood is then smoothed to guarantee a uniform surface and a perfect fit between the staves. Finally, the stave is tapered so that it is wider in the middle and narrower at the edges.

Pre-toasting the barrels is necessary to give their components their final shape. Under the effect of heat, the wood softens and becomes bendable.

Characteristics:

• Length: 150 mm
• Diameter: 170 mm
• Selected oak wood
• Capacity: 2 L
• 4-circle structure
• Complete with tap, cap and support

Instructions for use:

After washing the barrel, dry well making sure that there is no residual moisture. At this point sulfurize with 5/10 g/hl.

If the barrel is not used immediately, or before weeks or months, you have to wrap it in a plastic film and lay it down in a room with:

• Good humidity conditions (75% - 80%)
• No air currents
• Low light
• Cover with a cloth and avoid UV rays

Compatible spigots:

• Wine-tasting tap steel mini wooden dowel
• 1/2" stainless steel spigot
• 1/2" stainless steel spigot for wine
• 1/2" chrome-plated brass spigot
• Steel cone barrel bore 1/2" F
• 1/2" stainless steel spigot with steel cone barrel bore
• Chrome-plated brass 1/2" spherical tap with conical connection for wooden barrels

PRODUCT SUITABLE FOR CONTACT WITH WINES AND SPIRITS

The barrels are handmade products, for this reason the sizes are indicative

FAQ