Air-liquid separator filter with hose connector for Enolmaster

Référence: RMR0210
Marque: Tenco
€ 106,56
Produit disponible
Shipping within 5 working days (from Monday to Friday) from the receipt of payment.
Frais de port: € 24,59
Ajouter aux Favoris

Description

Air-liquid separator filter with hose connector for Enolmaster

Polsinelli’s store offers you the air-liquid separator filter for Enolmaster, an essential accessory to protect the vacuum pump when using sugary liqueurs or products with a high alcohol content.

Made entirely of polypropylene, the filter is placed between the vacuum pump and the recovery vessel to retain sugar and possible particles that, during the bottling process, could accumulate inside the pump.

Filter usage:

  • The filter has a "wet" side, which receives vapors of the product collected in the recovery container, and a "dry" side, which represents the filter’s outlet towards the pump. On the outside of the filter there is a raised arrow indicating the flow direction. The connection must be made so that the tip of the arrow is oriented towards the motor (the fitting located on the stainless steel cover).
  • After a certain operating period, depending on the characteristics of the product, a vacuum loss may be observed (manifesting as a slowdown in the bottle filling speed). In this case, the separator filter must be disconnected. Water at no more than 50 °C should be introduced from the “wet” side and left to act for a period of time. Then, the capsule must be emptied and compressed air at no more than 3 bar should be blown from the “dry” side to the “wet” side (counterflow), to remove as many retained residues as possible and restore proper flow for correct operation.
  • Visually, the transparent tube from the filter outlet to the pump body must always remain dry and free of condensation. This is the condition of correct functioning. If condensation appears, the filter has lost its hygroscopic capacity and must be replaced.

Characteristics:

  • Material: Polypropylene
  • Hose connector: Ø 10 mm
  • Use: During the filling of sugary liqueurs or high-alcohol content products
  • For use with Enolmaster series filling machine (to be purchased separately)
Description tecnique

Produits voisins
  • Remplisseuse ENOLMASTER pour Vin et Bière
    Professionnel
  • Remplisseuse ENOLMASTER avec récipient en pyrex
  • Remplisseuse Enolmaster PNEUMATIQUE avec récipient en pyrex
  • Remplisseuse ENOLMASTER avec 2 becs pour vin et Bière
  • Remplisseuse ENOLMASTER PYREX 2 becs Mignon
  • Remplisseuse ENOLMASTER pour Huile
  • Remplisseuse ENOLMASTER PYREX 4 becs Mignon
  • Remplisseuse ENOLMASTER pour avec 2 becs Huile
  • Remplisseuse Enolmatic
  • 50 microns cartouche filtrante pour huile
  • Remplisseuse Enolmatic avec bec en acier inoxydable
  • Entonnoir en plastique blanc Ø 10
  • Bec en acier inoxydable de remplissage Mignon pour Enolmatic et Enolmaster
  • Carton de filtrage 20x20 V0 (100 pcs)
  • Pompe à vide P30 complète pour Enolmaster
  • Pot de rechange pour chauffe-cire
  • Capsule en PVC bronze ⌀31 (1000 pcs)
  • Boule de Lavage Inox Ø28 Perforée
  • Produits similaires
  • Kit mignon 2 stainless steel spouts for Enolmaster
  • Kit mignon 4 stainless steel spouts for Enolmaster
  • Enolmatic filling machine with spout for beer
  • Enolmaster filler with pyrex vessel
  • Enolmaster filling machine for Oil
  • Enolmaster filling machine for Wine and Beer
    Professionnel
  • Enolmatic filling machine for oil
  • Milk Kit for Enolmatic
  • Kit  Enolmatic Kristal for long neck bottles
  • ENOLMASTER filling machine with 2 spouts for Oil
  • Silicone cone for Enolmaster for wide-neck bottles
  • ENOLMASTER filling machine with 2 spouts for Wine and Beer
  • Produits vus récemment
    Polsinelli Enologia S.r.l. N° de TVA IT02380340600 Copyright © 2026 Tous droits réservés Polsinelli Enologia Srl - E-commerce by Kodea