500 L regenerated Oak barrel with stainless steel manhole
Beschreibung
Regenerated 500 L Oak barrel with stainless steel manhole
Externally and internally regenerated with oxygenation and enrichment of tannins.
As well as being extracted from the grapes during fermentation, tannins are also found in the wood, so that the wine acquires the aromas even during its stay in the barrels or barriques.
Another function of tannins is that of preservative, in fact they also act as antibacterial, protecting the wine and ensuring its longevity.
Characteristics:
- Dimensions:
Length 110 cm
Ø 95 cm
- Manhole connection: 1"
- Manhole dimensions: mm 267x186
- Cork stopper included
Related products:
- 1" stainless steel spigot
- 1" stainless steel spigot for wine
- 1" valve GA-40
- 1" ENO 30 stainless steel valve
- Valvola DN25 M/M da 1" inox Aisi 304
Instructions for use:
After washing the barrel, make sure that it dries well and that there are no humidity residues. Then sulphurise with 5/10 g/hl.
If the barrel is not to be used immediately, or at any rate not for several weeks or months, wrap it in plastic film and place it in a room with a good hygrometry:
- good hygrometry (75% - 80%)
- no draughts
- low light
- Cover with a cloth and avoid UV rays.
It can be stopped with:
PRODUCT SUITABLE FOR CONTACT WITH WINES AND SPIRITS
Cask with transparent film, ready to be packed and shipped
The barrels are handmade products, for this reason the sizes are indicative
FAQ
What treatment should be applied to the barrel before and after use?
Click here to read the guide to barrel treatment.
